Slide the washbasin first, then the flat washers onto the bolts and tighten the nuts firmly. | A continuación, coloca sobre ellos primero el lavamanos y después las arandelas, y finalmente aprieta las tuercas. |
The kit includes packing, packing cage, bearings, compression springs, flat washers, clamping washer and o-rings. | El Kit contiene Packing, porta Packing, rodamientos, resortes de compresión, golillas planas, golilla de fijación y o ́rings. |
Next, using two #8x32x1/4-inch oval head machine screws and flat washers, secure six inches of stiff wire to each side of the film holder. | Después, usando dos tornillos de cabeza oval del #8x32x1/4 y arandelas planas, sujetar seis pulgadas de alambre rigido en cada lado del portafilm. |
In addition to series with flat washers, there are also series with spherical housing locating washers for compensation of static misalignment. | Además de las series con discos planos, hay series con anillos de alojamiento esféricos, para compensar los errores de alineación estáticos del eje. |
Take the completed assembly from step 1 and attach it to the top assembly as shown below attaching it with bolts (A) and flat washers (C). | Tome el ensamblado completo del paso 1 y móntelo al ensamblado superior como se muestra a continuación, utilizando los pernos (A) y las arandelas planas (C). |
The wire used for the cradle needs to be at least 3/64-inch thick because it also acts as a spacer between the film holder and flat washers holding the wire. | El alambre usado para la cuna necesita ser al menos de 3/64 pulgadas de grueso porque actua como soporte entre el portafilm y las arandelas planas que lo sujetan. |
Manufacturer of threaded and unthreaded rod and bar products, flat washers and nuts in many different finishes, sizes and materials. | Fabricante de varilla y barras productos roscados y no roscados, arandelas planas y tuercas en muchos diferentes acabados, tamaños y materiales. |
Metric stainless steel lock washers, sometimes called split washers, are used commonly in conjunction with metric screws or bolts, hex nuts and flat washers. | Métricas de acero inoxidable, arandelas de presión, a veces llamado arandelas partidas, se utilizan comúnmente en combinación con tornillos métricos o pernos, tuercas y arandelas planas. |
Install a mounting ball 1 to the mounting plate 2 with four #10-24 x 5/8 countersunk head machine screws, flat washers, lock washers, and nuts 3. | Instale una bola de montaje 1 en la placa de montaje 2 con cuatro tornillos para metales de cabeza avellanada n.º 10-24 x 5/8, arandelas planas, arandelas de seguridad y tuercas 3. |
Standard Galvanized Flat Washers. | Norma galvanizado arandelas planas. |
